Thursday, May 26, 2011

California Dreamin'

 Basically, from Fresno most of the way to Bakersfield, on this map

How the TGV start? It started back in the 1970s when the ligne à grande vitesse sud-est (French for "really fast southeast line"), or as normally abbreviated, LGV Sud-Est, was planned and built. This line ran from Paris to Lyon, and eventually would extend to Marseilles.

But it didn't start in the cities. No, the line actually started out in the country. The physical LGV Sud-Est runs between Saint-Florentin, in Yvonne départment, and Sathonay, in Rhône (formerly Ain) départment.
 TGV, in original paint scheme, running on the LGV Sud-Est 

Where?

Precisely.

The point I'm making is this is why California's LAO is dead wrong. Of course hardly anybody knows where Borden and Corcoran are, because hardly anybody needs to know. But then who knows where St. Florentin and Sathonay are? The LGV Sud-Est runs through the countryside, between what were, in 1980, Paris' and Lyon's most far-flung exurbs, and accesses the metropolitan centers via existing infrastructure*.

Likewise, even though Borden and Corcoran are the technical endpoints of the line, they're just interchange junctures. Passenger trains, such as the San Joaquins, would interchange onto the line in lieu of their current via-freight-lines routing at these places; their true origins and destinations would be well beyond Borden and Corcoran. The line is just a piece of infrastructure that operations (trains) utilize. Borden-Corcoran makes sense as a way of speeding up intercity trains' intercity travel, just as the LGV Sud-Est did. What the LAO is doing, in essence, is conflating the HSR-standard line with the equipment it's being built for.

Presumably, once the line extends past Bakersfield (Borden-Corcoran runs through Fresno and Hanford), HSR equipment would begin to be put into use, if not sooner; as the line extends, so too will the fastest trains' access area.
CAHSR Picture. Yay!

_________________
* Gare Montparnasse was rebuilt in 1969. The original station was built in 1840 as Gare de l'ouest (West Station); as a result, the infrastructure (station throat) predates the current patron experience (architecture).

5 comments:

  1. The French example of connecting existing infrastructure to a relatively small high-speed line in the countryside sounds like a very rational move, but I'm not sure that's what is going to happen in California. Especially if the HSR seeks an FRA exemption, I don't think they'll be legally even allowed to run it on existing Caltrain/whatever tracks, will they?

    - Stephen Smith, http://marketurbanism.com

    ReplyDelete
  2. Legislative Accounting Office, I believe.

    Rationalitate--yes, the FRA (aka F***ing-up Railroads Administration). My point was that you can use this corridor with FRA-compliant equipment before you begin phasing in noncompliant equipment.

    In the longer term, a stronger call on the part of the high-speed rail industry for further FRA reform viz. passenger rail will be necessary. Why on earth do Siemens and Stadler DMUs, service backbones the world over, have to segregated from freight here? Our railroad regulation today amounts for little more than protection for a dead industry: there hasn't been a true American passenger car builder in years, at the very least since Budd quit the biz in the early '80s.

    ReplyDelete
  3. Even assuming perfect regulations, there's a problem, which is that connecting from south of Bakersfield to Los Angeles is really hard. The only existing infrastructure is the Tehachapi Loop, the world's busiest single-track line; the freight traffic is so heavy that Amtrak California can't extend the San Joaquins to LA, forcing a bus connection over the Grapevine.

    That's why they're trying to expedite work on the EIRs for a connection to Palmdale (or maybe Santa Clarita), south of which there is much less freight traffic and the tracks are owned by Metrolink. Santa Clarita-LA would be perfectly workable on electrified legacy track; however, while they're checking that option, the preferred alternative is still to detour through Palmdale, and Palmdale-LA on legacy track is much longer, steeper, and curvier.

    ReplyDelete
  4. Well, see? You build the easy Central Valley bit first, and while you're doing that you figure out how to get into L.A., and when you've done that, you figure out how to get into Frisco (Pacheco or Altamont?)

    ReplyDelete